Sled Jig Rail Guide For Ryobi RTS23 Table Saw
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Sled Jig Rail Guide made for the Ryobi RTS23 Table Saw
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 148
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The miter slot for the Ryobi RTS23 table saw is a weird shape and there's only one of them. In order for any tools using the slot to be useful, there can't be a lot of wiggle room. I've previously made a wooden rail guide for my sled, but using the table saw to cut tiny rabbits on a thin strip of wood was not safe and I'd like to not do it again.
The miter slot, instead of being a normal T shape throughout, has two sections spaced about 1' apart with a narrowed overhang of the table saw top. For the best results, I wanted a rail guide that would hit both narrow sections a majority of the time.
I split the rail guide up into 3 pieces so it will fit on my printer. The rail guide snaps together without glue and mounts to a sled with a #6 wood screw.
If you want the rail longer, print multiples of the center piece to extend the length. If you want it shorted, just print the two end pieces.