Full Set of Cherry MX or compatible Key Caps
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Full set (minus num pad) of flat cherry mx key caps with fully modelled and painted lettering for easy printing.
- Ocena
- 0 / 5
- Polubienia
- 281
- Pobrania
- 675
- Wydruki
- 0
- Wyświetlenia
- 6726
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
I have designed a complete set of flat-faced, Cherry MX–compatible keycaps featuring fully modelled symbols, specifically optimised for multicolour 3D printing. The symbols edges are inset by 0.5 mm into each keycap, adding physical depth and allowing the printer to build additional layers for greater definition. This results in noticeably bolder, clearer lettering, which is especially effective when paired with LED backlighting.
I have provided a complete set of both 3MF and OBJ/MTL files in zipped folders (other files) The OBJ/MTL files seem to load pre-painted and you can chose whichever colour you like to print them in. The 3MF files can be painted manually in your slicer, paint the entire key your chosen colour, then select the fill option and paint the letter face - print face down at good/best quality.
I printed all my keys on an Anycubic Kobra S1 Combo at 0.16 layer height. When slicing i recommend you check which key its going to print first by checking the tool path and making a clone right next to it, i found sometimes the printer would miss or mess up a tiny part of the first key it printed (im guessing due to retraction). Making a disposable one solved that for me. You may have better printer settings than i :).