NFC Valentines Day Picture Frame – Link Your Memories
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Valentine photo frame with NFC feature, allowing you to link your most romantic moments with a song or vacation video.
- Ocena
- 0 / 5
- Polubienia
- 50
- Pobrania
- 104
- Wydruki
- 0
- Wyświetlenia
- 588
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
Optimal Photo Size: 10x15cm
The frame is designed as a modular press-fit/magnetic assembly with a separate backplate and stand. The photo is inserted from the top through a dedicated cutout, making it easy to change pictures without disassembling the frame.
Key Features
Easy photo change
NFC integration option
One heart element (top left, with a smaller heart cutout) includes a rear cavity for an NFC tag. A tag can be glued in before final assembly, allowing you to link the framed photo to a website, message, video, or other digital content.
You can write data to the tag with this free App for Android and Iphone.Wall mounting option
A cutout in the backplate allows the frame to be hung on a nail or screw.Magnetic mounting option
The backplate includes four round magnet cutouts, enabling the frame to be mounted on magnetic surfaces such as a refrigerator.
Magnetic stand option
An optional stand (not shown in the images) uses two magnets and snaps onto the lower magnets of the backplate, allowing the frame to stand upright on a desk or shelf.
Modeloptions
Choose between downloads
individual Parts (STL, STEP)
Whole Project (3MF)
Whole Project Multicolor (3MF; Multi Material System recommended)
Print Settings
Material: PLA or PETG
Layer height: 0.2 mm
Supports: Not required
Recommended wall/perimeter order: Outer/Inner
Print stand sideways with 90° cutout angle facing upwards for cleaner print results without supports
Additional Material
Magnets (10 x 3mm) like these (Link to Amazon)
NFC Chips (max 32mm in diameter) like these (Link to Amazon)
Assembly Instructions
(Optional)Glue the NFC tag (29mm ⌀ max) into the designated cutout behind the special heart element.
(Optional) Glue four round magnets into the cutouts in the backplate.
Press the backplate and frame together until fully seated (press-fit connectors).
Insert the photo from the top through the image cutout.
(Optional) Glue two magnets into the stand and snap it onto the lower backplate magnets
Important
Pay close attention to magnet polarity between backplate and stand before gluing.