Ghost (pacman inspired) Money Box No AMS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Ghost style moneybox from pacman
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 141
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A Pacman Ghost inspired money box, to go with the Pacman one I also made.
There is also a Ghost storage Jar, and a Pacman model (not a moneybox or jar)
When preparing the eyes I suggest you file and sand all the bottom edges, then glue the little black inserts in the eyeball, let it dry and repeat, then push the assembled eye through the model a few times (it may be stiff) and it will loosen up after a few goes, if you want to glue the whole eye in (I didn't bother was tight enough not to fall out) DO NOT use superglue as it dries too quick and if you misalign it you won't get a second chance! use epoxy.
Will print with no supports.....just. Just make sure you slow your printer down sufficiently for the overhangs.
I strongly suggest using adaptive layer heigt of 0.3 and smooth about 7 times in Orca Slicer to get the head smooth on the top.
The photo below is of the ghost stoage jar, this model is the same, but it's 1 part and has a coin slot and threaded bung in the bottom.