The Extractor - Nock Remover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Idea
The Extractor - a special tool for the removal of small objects from pipes, slits or else. Specially made to easily extract and remove broken nocks from arrows.
Just put in some screw (wood screws might work best) that fits your desired diameter and screw the two parts together for a tight fit. You can easily change the screws if you need different diameters, e.g. for different nocks.
If your nocks are still alright but just misaligned try the nock turning tool.
Also check out the Ultimate Archery Companion.
Print information
The tolerances are very tight on version 1 of the handle. I recommend to adjust the print settings to compensate for the tolerances in xy direction. Especially the screwholder can be modified to compensate for too small holes. If you have any problems with bed adhesion for the handle try using a brim.
Updates
02/02/26: Repaired the handle file. Added handle version 2 with better tolerances for easier assembly.