Elegoo Centauri Carbon - Low Resistance Bearing Caps
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Low resistance Z feed rod bearing cap covers compatible with the Elegoo Centauri Carbon
- Ocena
- 5 / 5
- Polubienia
- 35
- Pobrania
- 234
- Wydruki
- 2
- Wyświetlenia
- 745
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Low resistance Z feed rod bearing cap covers allow for custom colors while also keeping bearing surfaces covered and shielded from dust and other debris. The original rubber rod bushings can be removed using a safety pin or thumb tack then poking and pulling up till the bushing is extracted. The new upgrade caps can then simply be installed by inserting over the top of the rod and pressing down till firmly seated and covering the exposed bearings.
Model comes as a complete set ready to be sliced and printed. Recommended layer height of .16 but .2 is just fine. No need for supports or reorientation.
Also be sure and checkout Z Rod Performance Grease Port Bushing Caps for the Elegoo Centauri Carbon to add grease ports to your machine