Turbo Grafx 16 RGBS Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I purchased a Turbo Grafx 16 RGB adapter from eBay and none of the cases looked how I wanted them too, so I remixed…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 30
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I purchased a Turbo Grafx 16 RGB adapter from eBay and none of the cases looked how I wanted them too, so I remixed this together. Needs supports for the overhangs. You should modify the slicer to user just 1 perimeter for the first layer on the the top piece so the logo looks better. I included 2 bottoms, one with the letter knockouts for the switch and the jacks and one without. It is designed to leave the bottom open where the socket meets the PCB, there is just not enough space to close the model up without causing issues with fitment in the TurboGrafx.
Here is the TinkerCAD link where I made it. https://www.tinkercad.com/things/4DL3UpnEShd-turbografx-16-rgbs-case
The original eBay device: https://www.ebay.com/itm/264932861852
Category: Toys & Games