Lego Saturn V Horizontal Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A wall mount I designed for the Lego Saturn V I decided to make this, because all other mounts I found were either…
- Ocena
- 5 / 5
- Polubienia
- 180
- Pobrania
- 686
- Wydruki
- 14
- Wyświetlenia
- 5972
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial
A wall mount I designed for the Lego Saturn V
I decided to make this, because all other mounts I found were either vertical, or mounted the rocket in one piece.
The printed pieces are mounted to a 18mm wood panel, which is stained dark brown, with 22mm M3 screws and 4mm brass inserts, or a M3 thread cut into the plastic.
The Panel itself is mounted to the wall with the two mounting plates and four 5mm screws.
There are two drill guides for the rocket holders.
I got the 3D model of the rocket from here: https://grabcad.com/library/lego-nasa-apollo-saturn-v-21309-1
Print Settings
Printer:
HyperCube Evolution
Rafts:
No
Supports:
No
Resolution:
0.25 - 0.15
Filament: Prusament PLA Pearl Greay
Notes:
I printed it with 4 perimeters and 4 top and bottom layers, and it is strong enought