Renovation Philips Tape recorder N7150
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Philips tape recorder N7150 has some common defects over time. This tape recorder is sold by different…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 120
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
The Philips tape recorder N7150 has some common defects over time. This tape recorder is sold by different manufacturers (Example Aristona SR4149). The renovation includes replacing the right and left helicon inner gear of the reels and replacing the power switch.
Gears: Remove the soft gear material inside and outside the reel. Use a stanley knife, Clean with a steel brush. Use a mini tool for this. Note the direction of the teeth. The teeth of the left reel are backwards. The teeth of the right reel are forwards. Place the reel cover outsite the reel.
Switch: The switch is available by CONRAD. Article: PWL-2P1TL-6SASHA Article number: 701606 - 8J. Remove the metal holder and replace this with the 3D one
3D Print: Filament Gears: Nylon ESUN PA-175, Temp:265C; Retraction 0.5mm: Dimention correction 0.1 Filament Cover and Switch adaptor: PLA
Category: 3D Printer Parts