Valorant BlastX Knife
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my first ever from-scratch model. I used the actual in-game files to get dimensions as close to perfect as…
- Ocena
- 5 / 5
- Polubienia
- 98
- Pobrania
- 520
- Wydruki
- 8
- Wyświetlenia
- 4135
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is my first ever from-scratch model. I used the actual in-game files to get dimensions as close to perfect as possible, but there are definitely a few minor mistakes. However, I believe this to be the most accurate model I could find, even compared to those you can buy on other STL sites. It's sized to be able to fit on a Voxelab Proxima print bed, and once it's all put together it's 207mm (8.14in) long.
I would suggest printing the grip at ~101% as it was a tight fit. The inserts were real tight but I added some more room after the test print so I think they should fit well now.
Print 3 of the Inserts
Print 2 of the Buttons
Print 1 Grip
Print 1 Hilt
Print 1 Handle
Print 1 Corner
Print 1 Blade
Ignore my poor spray paint job, the green did not cooperate. I'd love to see your results!
DISCLAIMER: This model is under a Creative Commons Attribution-NonCommercial-NoDerivs 2.5 Generic (CC BY-NC-ND 2.5) License. There will be absolutely no sale of the model or its printed parts allowed.
Print Settings
Printer:
voxelab proxima
Notes:
I printed this with an SLA printer. I have not tested it with FDM. If you print FDM, expect to have to sand to get things to fit perfectly. If i were to print it on my ender 3 I'd split the handle, blade, and hilt in half. The rest I'd just print with supports touching the inside non-seen parts.
Category: Props