1 / 1
Elite Suito Tennis Ball Feet Rear Stabilizer — zdjęcie 1

Elite Suito Tennis Ball Feet Rear Stabilizer

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Redesigned the Tennis Ball Feet for the Elite Suito to fit into the two holes near the rear rubber feet

Ocena
0 / 5
Polubienia
4
Pobrania
153
Wydruki
0
Wyświetlenia
797
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Indoor Sports
Licencja
Creative Commons — Attribution — Share Alike

I printed it with 7 wall loops and a line width of 0.5mm and an infill of 50% in PETG. 

You have to unscrew the three original rubber inserts before inserting.

I printed 4 of the original feet and added this one to stablelize the feet.

Makes indoor cycling on the suito much more comfortable.

But I also want to add here as in the original post: Use at your own risk! 
For my use case it works perfectly, but I don't know if it will withstand a all out sprint training.