Renter-friendly window mount for Harbor Breeze Solar Meshtastic Node with SMA antenna
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This mount hangs over the top of a window to allow you to mount a harbor breeze node outside without drilling.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 304
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a way to mount my Harbor Breeze Solar node to the exterior of my apartment as high as possible without drilling into the brick. I decided to make this mount that hooks onto the top of the window. I have also added a small command strip at the base of the mount between the mount and the window, to secure it even further. When the window is closed, it doesn't allow any air to leak into the room and it's very secure. You should also use the hole on the part of the mount that is inside as a safety leash.
I highly recommend printing out of PETG. PLA will sag after only a few months in the sun.