Conversation Heart Magnets - Small, Medium, Large
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Conversation Heart candy now in magnet form
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 92
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Affiliate links for my favorite filaments to help support what I do are here: Linktree
Cool Plate Supertack is recommended if you would like the best surface finish. (https://us.store.bambulab.com/products/bambu-cool-plate-supertack) PLA Matte will give the same aesthetic as the candy and is linked below.
For Valentine's day my wife requested that I make Conversation Heart candies into magnets to put on display at her work. The text on these can be adjusted to say whatever you may want to communicate to that special person in your life. The model has been scaled and magnet positions have been adjusted so that you can use the 8mmx3mm magnets. No glue required!
Verify that the pause occurs in your preview before printing or you will just have a fun handout and not something with an embedded magnet :)
NOTE - If you would like to use 2mm magnets ensure that you adjust the negative part accordingly (2.2mm in the Z axis) and then ensure that the position of the negative part is moved so that there are no more than 2 layers printed after inserting the magnet for best magnetic strength.
Happy printing!
Commercial rights for my models can be purchased with a membership to my Patreon: https://www.patreon.com/c/SODA3D