Svord Peasant Spacer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a small spacer for the second peg of the Svord Peasant knife.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 28
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This spacer is designed to fit the screw "rivets" on the Svord Peasant. The post that does not act as a blade hinge does not have a spacer, allowing it to slip closed and pinch the blade, making opening and closing more difficult. Additionally, when the knife is closed the blade rests against the brass post, causing additional wear on the edge in a single spot. A plastic spacer fixes both problems simultaneously.
The blade and washers are roughly 2.2 mm thick all together, so the spacer is 2.5mm thick. It fits slightly tighter than the washers and blade do, but still slips over the post easily.
The example piece was printed at 0.08mm layer height on a Sovol SV06 Plus.