BMG + Nema 17 mount for Filamentalist FV3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replaces the rear spacer mount with a mount that can hold a BMG + Nema 17 Motor
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 151
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I wanted to add filamentalist to my 3MS MMU system, and I wanted to more cleanly integrate the extruders into the system. This uses the rear mount and rear orientation of the filamentalist FV3 to mount a BMG and stepper.
This was inspired by the EMU project, but I didn't want to print new extruders when I already had BMGs, and I didn't want to commit to the BoM that the EMU had.
I'm very bad at cad. This is like my second time ever using fusion 360, so please don't scrutinize the files too much. I've included a F3d file from flamentalist to show how it fits in with the stepper and BMG. Not sure if it will fit larger ones, but I just had 23mm pancakes on hand
Print with 4+ walls. I did PLA but Filamentalist recommends ASA.