LG Refrigerator AAP73792201 Door Bin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement Door Bin for an LG refrigerator. Measures 308mm wide.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 114
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
On my LG refrigerator door bin, the pegs that hold the bin into the door insert broke off. I modeled the bin and the print fits as a perfect replacement!
This JUST BARELY fits on the QIDI Plus4 print bed. If your bed is smaller than 305mmx305mm, this may not fit.
Printing Considerations
As this tray can hold a lot of heavy glass bottles (condiments), I wanted to make sure that the area where the walls meet the floor were 100% infill, but I also didn't want to print the whole thing at 100% infill (3mm wall thickness). I also wanted to make sure the pegs are well supported, so I wanted those areas to also be 100% infill as well.
I made zones in my slicer to have 100% infill for a couple mm inward and upward at the edges. I did this for the pegs as well. I also forced supports for just the pegs.
Print this out of PETG as it can handle temperatures better (if ever you should put it in the dishwasher for cleaning).
Cheers!