Ironing test plate Multiple layer heights + settings
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Thickness is dependant to Layer Height. 0.2 for first layer for all models.
- Ocena
- 0 / 5
- Polubienia
- 30
- Pobrania
- 595
- Wydruki
- 1
- Wyświetlenia
- 1653
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Weirdly enough, it's sort of hard to find a calibration table for ironing flow + speed. Also, Reddit seems to have wildly different settings they live by for PETG. This model leaves no guesswork.
The models have different thickness depending on your preferred layer height. Please choose the right file for your needs as LH has an impact on the best ironing flow.
Printed once for a material and the best setting can easily be seen from the results. Just open the file, change the filament / printing profile to your liking, and print. Leave ironing settings off though! The ironing settings are changed by object for each square. It will be taken into account when slicing.