Ring Binder Divider A4 with Custom Nameplates P2S - All 4 one Plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ring Binder Divider with Custom Nameplates for A4 sized binders. Allows up to 12 dividers without overlap.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 189
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
Ring Binder Divider with Custom Nameplates
Allows up to 12 dividers without overlap for A4 sized binders.
I created this because I wanted to make a custom card binderwith dividers for my Daggerheart. Using rings I bought and some 9 card pages, with the dividers I now have this nice setup!
P2S is able to print 4 of them on a single plate, the P1S unfortunatley only 3 due to the limited corner. It's too big for the A1 Mini plate.
It's about 20g of filament per 4 of them, with another 5g of filament for the Nameplates.
Nameplate Generation
For nameplate generation you can either:
Use the .scad file to generate the nameplate.
Download the .3mf for Bambu Studio and update the text for the nameplates.
Download the empty .stl file and add your own text.
Then you just glue them into any of the bases.
The current size text just about works with 0.4mm nozzle, but it's not perfect if you have longer words like “COMMUNITY”. Smaller words you can increase the size, or you can look at printing these with a 0.2mm nozzle.