Steam Deck JSAUX Modcase Belly Stand, Arca Swiss, SD Card

Several related models are included, designed specifically for use with the JSAUX Modcase.  I'm using the Steam Deck version, so I don't have 100% confidence all of these models will work with other versions of the Modcase.

Model Descriptions: 

1. Belly Stand Parts - there are a couple of different versions of this.  The stand prints in two parts, and connects with m3 screws.  I previously used another belly stand, but wasn't happy with its height or its ease of printing.  This is dead simple to print, and easily customizable for different heights.  You'll need two m3x5x4 heatset inserts (I use the voron style inserts), placed into the base of the upright.  

• Belly Prop - the base of the belly stand.   The curved part that is intended to be rested on your belly.  :)  Works with either of the two upright pieces described below.  

• Taller Belly Stand (Dovetail) - Intended to be used with a cheapo Arca Swiss style clamp.  The clamps can be had on amazon for about $12.   There's a hole at the top that is intended to be used with a 1/4-20 screw or bolt to connect the clamp to the riser.  If you use this style, you'll presumably also want to print the Steam Deck JASAUX Mod Case Arca Swiss Style Dovetail Interface to use with it.  Print this one on its back.    

• Taller Belly Stand (Integrated).  This version of the upright portion of the belly stand has the slot cut out to slide onto the Modcase dovetail.  Print on its side.  

1. Steam Deck JASAUX Mod Case Arca Swiss Style Dovetail Interface - used in connection with an arca swiss style clamp.  I use this version so I can easily swap between the belly stand and a couple of other mounts I frequently use with my steam deck, including a camera arm mount that I have on my bed to hold the deck while I game at night.  There are 4 holes for m3x5x4 inserts that are optional.  The two in the middle are there for retention of the plate on the mod case.  They take m3x10mm screws - the screws protrude into the interior of the modcase dovetail to prevent the plate from sliding around too much.  The two outside holes are intended to help index the plate into the arca swiss clamp.  None of the 4 are truly needed in my experience, but... the holes are there so I use them.  

2. Quarter-Twenty Attachment Plate - this is a simple plate that slides onto the Modcase dovetail.  There's a hole in the back intended for use with a 1/4-20 heat set insert.  The inserts I have are 9.5mm OD.  Hole diameter is 8.5mm.  I used this for a while with my camera arm, but laziness required me to swap over to the arca swiss style mount.  

3. Steam Deck Micro SD Card Holder and Steam Deck Micros SD Card Lid - this is a tiny little case for two micro sd cards that is tape using 1mm thick 3M VHB tape.  It fits nicely in the space under the Modcase stand.  

Step and f3z files attached for modification.