Pliers organizer for toolbox drawer (2 pieces with dovetail joint)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed to fit my toolbox drawer and the specific pliers I own, with as little wasted space as possible.
- Ocena
- 5 / 5
- Polubienia
- 448
- Pobrania
- 2134
- Wydruki
- 2
- Wyświetlenia
- 11 727
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed this for my specific toolbox drawer (US General 44" top chest), and the specific pliers I own. It probably won't be perfect for you unless you happen to own exactly the same stuff. But I am sharing it anyways, because some people asked for it. And apparently I suck at measuring, because I had to trim the edge of the front piece to get it to fit in the drawer - it was about 10 mm too long.
I designed it to be printed with 1.25 mm line width and 0.6mm layer height. I used a 0.6 mm nozzle to print mine, and used PETG filament. Printed solid, no infill. PLA filament would definitely work fine too.
Dimensions of the two pieces are 271mm x 201mm and 243mm x 201mm so you need a bigger printer, or you'll have to break these into pieces somehow. Or just design your own in TinkerCAD, that's how I made these.