Pokemon TCG Booster Pack Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed model of Simple Ultra Pro One Touch Stand by About40Chairs
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 187
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
At the time of uploading this, the acrylic case, specifically from seller TCGKaizen https://www.etsy.com/shop/TCGKaizen?ref=yr_purchases , is no longer up on their website. You may be able to contact the seller to see if they could still make them.
I remixed this to fit an acrylic case off etsy. I just enlarged it through bambu studio. This model is the untabbed, 11 degree, tall front, short bar. It does fit the acrylic case nicely, but the bar does push the stand pieces out to the very edge, which can be seen in the photo. It may need to be shortened a bit, but it works for me.
Acrylic case thickness measured to be about 10.74mm thick. If you have a similarly thick case, it may work for you. Again, the bar just needs to be shortened a bit.
Printed on a a1 mini
0.2mm standard preset
no settings changed other than seam position, top layers, and sparse infill settings.
printed in pla white laying on the side, but re-oriented standing up for model upload.