Retaliator Top Prime Assist & Sight
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adds both a crude sight and a bit more grip area to top prime your higher spring load Retaliator.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 295
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Adds both a crude sight and a bit more grip area to top prime your higher spring load Retaliator. (tested using 7kg Worker Spring)
Inspired by a similar model found here (borrowed some of the geometry) and refined the design. This top prime assist requires no additional hardware.
Print in orientations as imported into slicer. (the pin is sideways for better mechanical strength due to repetitive stress - PETG or similar strength for this part is recommended; print at 80% infill/5 or more top/bottom/walls)
To install, first remove the Nstrike attachment nub and spring (dependent upon model). Then simply slide the rail from the front to the back, align, and gently tap the pin into place. After installation you can easily adhere some grip tape for even more grip!