1 / 2
PTFE Tube Adapter 6 mm to 4 mm for PolyDryer Box — zdjęcie 1
1 / 2

PTFE Tube Adapter 6 mm to 4 mm for PolyDryer Box

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adapter to connect the 6 mm PolyDryer tube to standard 4 mm PTFE tubes.

Ocena
0 / 5
Polubienia
4
Pobrania
16
Wydruki
0
Wyświetlenia
71
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Adapter designed to connect the 6 mm PolyDryer tube to 4 mm PTFE tubes, with an internal path optimized to prevent the filament from jamming.

The adapter provides a secure friction fit that holds both PTFE tubes firmly in place, yet remains easy to remove.

PRINT SETTINGS

  • Layer height: 0.15 mm

  • Perimeters: 2

  • Infill: 30% Grid

  • Supports: Organic

  • Orientation: small hole on build plate

Tip: cut the filament at 45° before inserting it into the tube for smoother feeding.