1 / 2
Direct Drive Mount (Drivinator) for BMG and Satsana on Aquila WITH Cable Chain Mount - thick remix — zdjęcie 1
1 / 2

Direct Drive Mount (Drivinator) for BMG and Satsana on Aquila WITH Cable Chain Mount - thick remix

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a remix of "Direct Drive Mount (Drivinator) for BMG and Satsana on Aquila by 187penguin" and"Voxelab Aquila…

Ocena
5 / 5
Polubienia
6
Pobrania
72
Wydruki
1
Wyświetlenia
1097
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

This is a remix of "Direct Drive Mount (Drivinator) for BMG and Satsana on Aquila by 187penguin" and"Voxelab Aquila Satsana Cable Chain Mount - thick remix" by oloffus. Both engage the pulleys on the top of the carriage as support, so remixing them together was required. Unlike other mounts, this one requires removal of the pulleys, and passing them through the part and is far more effective than a clip on version.

THIS IS FOR THE THICKER REMIX OF THE VOXELAB AQUILA CABLE CHAIN ONLY

Should be printed in PETG or ABS. PLA only if you actively cool the stepper motor with a fan. PLA will melt without a fan on the stepper motor.

Print Settings

Printer:

Tronxy XY-2 PRO

Rafts:

No

Supports:

Yes

Resolution:

0.20 layers

Infill:

15% 3D fill

Filament:

Sunlu ABS

black


Notes:

This combines the BMG mount that uses the pulley wheels as retention with a strain relief cable chain. Uses the "thicker" remix of the cable chain!

Category: 3D Printer Parts

Tagi