Cascadia Tile Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple container to hold tiles for the game Cascadia
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 116
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution
This is a simple tile holder for the game 'Cascadia'. The name on the upper lid is is a separate component, so you should be able to print that in a different color, or print it separate and glue it in later for single color printers. I personally just left the name 'hollow', and printed it as a recess into the top lid Included are both the .f3d file and .stl files. The tiles are 42mm from flat end to flat end, and 2mm thick. The .f3d files are parametric, so you should be able to edit the dimensions to fit any hexagonal tile set.
Note: I edited the model after printing. I found the holder difficult to open, so I added fillets to the edges and the hexagonal openings on each end.