Strong Reliable Filament Clip/Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple filament clip preventing filament from unwinding - strong a reliable.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 51
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A simple filament clip preventing filament from unwinding.
I've tested many filament clips that can be found here but none of them did the job without some compomises so I designed one for myself that:
Is not below 1 mm thin and don't break easily.
Does not attach to the spool (and therefore can't get lost when stacking spools).
Has hole for the previous coil of filament so it can be left on while printing but has no sharp edges at the hole entrance so the filament doesn't get stuck occasionally.
Holds the free end of the filament reliably - not just sometimes.
Print preferably with PETG or ASA/ABS, print layer below 0.2 mm and print SOLID.