ABUS knob cylinder to Nuki Ultra gear DE: ABUS Knauf-Zylinder auf Nuki Ultra Zahnrad
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ein Adapter von ABUS Knauf-Zylinder auf Nuki Ultra (Zahnrad). ENG: An adapter-part for ABUS knob cylinder to Nuki Ultra
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 199
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Open Community License v1
Adapterstück + Blende.
Hinweis zum Ausdruck:
Mit 0,15mm Schichthöhe gedruckt. Und Anzahl Perimeter erhöhen bis alles gefüllt wird.
Material: PC-CF oder PETG-CF empfehle ich.
Im Slicer hohe auflösung bzw. nur geringe Längen- und Kurvenabweichung erlauben.
Stehend ausdrucken, Verzahnung soll oben sein.
Es gibt dazu eine Blende, die anstelle von der inneren Metall-Platte montiert wird..
Modell als .stp, dass Anpassungen leicht möglich werden.
EN:
Adapter part + faceplate (trim).
Printing note:
Printed at 0.15 mm layer height. Increase the number of perimeters (wall loops) until the part is fully filled/solid.
Material: I recommend PC-CF or PETG-CF.
In your slicer, use high resolution settings (allow only small maximum deviation for line/curve approximation).
Print upright — the gear teeth should be on top.
There is also a faceplate included, which is mounted instead of the inner metal plate.
Model provided as .STEP (.stp) so modifications are easy.