Companion Cube Speakers - C-Note
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This was a triumph.
- Ocena
- 0 / 5
- Polubienia
- 30
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 739
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Full build video here: https://youtu.be/NxO_G4J-Yf4
This was a triumph. These 3D parts are made for the DIY C-Note Speaker kit from Parts Express.
Link to the speakers: https://www.parts-express.com/C-Note-MT-Bookshelf-Speaker-Kit-Pair-with-Knock-Down-Cabinets-300-7140
The 3d Files can be printed out and glued on top of the MDF speakers supplied by Parts Express. I would include a speaker box as a 3D file, but from what I've read, the material the speaker box is made out of needs to be a very dense material like MDF for the best sound quality.
Modeled in Fusion 360. Printed with PETG. Sprayed with filler primer, then spray paint. Glued with 5 min epoxy.
The parts are labeled with sides and corners. Sides first. So "F-MT" would be Front - Middle Top. "B-TR" would be Back - Top Right.
Category: Electronics