Yeti Cup Holder GemCar
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I found this awesome design by Plastic_Innovations and made a few tweaks. I shrunk it a bit to better fit the Yeti…
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 146
- Wydruki
- 2
- Wyświetlenia
- 1121
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution
I found this awesome design by Plastic_Innovations and made a few tweaks. I shrunk it a bit to better fit the Yeti 32oz cup. Its not a snug fit which allows room for something slightly bigger. I installed this in my 2016 gemcar and thought others might like it. It does require you to drill 2 holes. I also made a spacer for support so you can add a 2nd cup holder. The cup insert is for added color and coolness. It is not necessary but does add the feeling of an extra 2 mph, downhill.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
.20 or .30
Infill:
20%
Filament: Prusament PETG Black
Category: Audio