simplecore rod belted Z
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
remixed this z system to fit what I had
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 381
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
For BBOX or simplecore
I had some problems with the z system on my BBOX so I adapted this system from the simplecore since this two are very similar printers, THIS IS NOT TESTED partially...
this is a correction of my files, my previous files had a 1mm of misaligne with the rod on the tensioner carriage that has been corrected and moved in by 5mm the rod position so you could use frame braces, this does not mean that my previous version does not work, in fact Im using it but without this corrections
Also used Airvana's tensioner mod
 |  |
|---|
 |
|---|
NEW COMPONENTS THAT I USED
X2 608 Bearings
x8 M3 nuts
x6 M3x30 screws