1 / 5
Rhombic Dodecahedron Fractal Sculpture V3 | Level 5 — zdjęcie 1
1 / 5

Rhombic Dodecahedron Fractal Sculpture V3 | Level 5

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Fractal sculpture built from rhombic dodecahedra. Prints support-free.

Ocena
0 / 5
Polubienia
3
Wydruki
0
Wyświetlenia
87
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Sculptures
Licencja
Standard Digital File License

Here is another fractal object, this time created in FreeCAD.


The form is built by scaling and transforming sections of rhombic dodecahedra, then assembling those sections into a larger fractal structure using circular patterns. A small top portion of the model was removed and transformed to create a flat base without altering the overall geometry. The base is not especially sturdy, but it works. Just take care not to knock it too hard.


The model prints in approximately 10 hours and requires no supports. The example shown in the photos was printed in Sovol dual silk PLA in Rose Blue, which nicely accentuates the repeating geometry of the design.


Print Settings:

Nozzle: 0.4 mm
Layer Height: 0.16 mm with 0.2 mm base layer
Infill: 10%, Gyroid
Supports: None
Brim: Recommended for adhesion. (Skipping the brim may cause the print to fail.)



Feel free to reach out if you need help with the print. 👋

Thank you for downloading and supporting Endless Design Lab! 🌀

*Selling physical prints of my designs is only permitted if you are an active member of my Authorized Seller tier on Patreon, Printables, or MakerWorld.* To learn more, visit https://www.patreon.com/c/endlessdesignlab

Endless Design Lab has many more mind-melting models to be unveiled!

Please show your support by following me on your favorite platforms. 
https://linktr.ee/EndlessDesignLab

🤝 Want to collaborate?
📧 Email me at [email protected]

Tagi