1 / 4
1:3 Scale Federal Signal "2T-22XL" — zdjęcie 1
1 / 4

1:3 Scale Federal Signal "2T-22XL"

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a 1:3 Scale replica of a hypothetical siren design Federal Signal could have released.

Ocena
0 / 5
Polubienia
13
Pobrania
36
Wydruki
0
Wyświetlenia
405
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial

A concept that began with a question: What if Federal made a larger version of the 2T-22 based on the STH-10? Thus, the 2T-22XL was born. This design uses Nascarsimracing1's 1:3 scale STH-10 as a base, with an additional 10-port rotor added up top. Much like his other designs, this uses a Samsung DE31-00028/00029 motor (with different motor covers for each, as the length varies slightly).

This also uses Nascarsimracing1's rotor weight design for some incredible coasting times. If your motor has smooth bearings, you could get upwards of a 5-minute wind-down!

Documentation is included that provides detailed information about the required hardware, slicer settings, and assembly instructions. Changes and suggestions are welcome, as I'm incredibly new to this thing. I will be working on incorporating supports into the rotor & stator in the future to not rely on slicer setup, so stay tuned!

Links to some detailed hardware requirements:

Tagi