Bumper Case For HackRF Pro
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I purchased the HackRF Pro by Great Scott Gadgets recently, and as it seems to follow me around a bit I thought I should add a bit of protection for if/when I drop it, and maybe add a touch of colour. I have printed mine in TPU95A, so this or softer should be fine.
Special care should be taken in fitting this to not put excessive force on connectors/buttons/etc, and it is a tight fit. So if you are not sure, stop what you are doing and take it off.
The case should be fitted by inserting the USB-C/P1/P2 end in first, then carefully lifting the center of the opposite end over the RF connector and wiggling gently into place.