Dual Filament to PFTE/Bowden Tube Adapter for Lack Enclosures
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An easier way to guide two filaments from the top of my Lack Enclosure to the filament detector on my Prusa Mini.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 43
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted an easier way to guide the filament from the top of my Lack Enclosure to the filament detector on my new Prusa Mini+ and still use my original Prusa MK4S mounted filament holder.
This guide is placed directly under the filament holder and passes through the Lack table allowing either filament reel to be used as needed with a minimum of hassle. You can use the guide as printed or add a standard PC4-M10 adapter with a Bowden Tube running to your printer.
To simplify the installation process, I also created a template that can be used mark where to cut the slot on the top of the table and then flip it over to drill a pilot hole through the underside of the table to determine the location of the exit tube (13mm bit required).
The unit was designed to be printed upside-down and shouldn't require supports, using the default Prusa Slicer settings.