uConsole discreet pcb wifi lora antenna mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a 1mm spacer to add an antenna 'block' at the top and space for another antenna of your choice. M4 x 5mm Screws needed!
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 390
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Public Domain
M4 - 5mm screws needed for the extra 1mm thickness
a 1mm spacer to add an antenna 'block' at the top, bringing the original antenna away from the metal body for better signal
keeps the uConsole looking close to stock. the antenna 'block' is modular and can be easily modified. It isnt glued into place so can be swapped out easily
Dont forget to add extra 1mm thermal pad for cm4/cm5!!
all parts printed using PLA. Shrinkage with other materials not taken into account
Front casing in development. added 1mm of thickness to accomodate for 1mm spacer i created. Currently waiting for it to print so i can test for fit