Over-the-Door Towel Holder Ring
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An easy-to-print over the door towel holder ring. Designed for relatively standard 1-3/8" -- 35 mm thick doors.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 72
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- GNU General Public License v2.0
I needed to be able to hang towels on the door and I didn't want to permanently install a towel hook. I designed this to be a low-profile over-the-door hanger that you can easily move around as needed while still being strong enough to stand up to daily use.
This comes in two pieces. Print the ring and the hook and slot the straight section of the ring into the hook. Place the hook over the door.
The choice of material is yours, but I recommend printing this in a tougher material such as PETG as it can definitely get a lot of abuse. PLA+ may work, but I wouldn't use standard PLA as it is probably too brittle.
I printed the ring using 0.16 mm layers and the hook using 0.2 mm as separate jobs. I didn't have to use supports, but I did use a brim on the hook. If you have adhesion issues, you may want to use both a brim and supports. The export didn't work as I had hoped so I recommend rotating the models from their default orientation.