1 / 5
Bambu Labs P1 and H2 Poop Bucket — zdjęcie 1
1 / 5

Bambu Labs P1 and H2 Poop Bucket

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Poop bucket for Bambu Labs P1 and H2 printers.

Ocena
5 / 5
Polubienia
1
Pobrania
48
Wydruki
1
Wyświetlenia
174
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

These are poop buckets for the P1 and H2 series of Bambu Labs printers.  I got tired of trying to find boxes to catch filament poop so i made some catch buckets.  For the H2 series you just need to remove the screw under the poop shoot and reuse it to attach the poop bucket clip.  For the P1 series I found that the screw on the machine was too short so I replaced it with a longer one.  I've also attach the 3MF file so you can see how to orient the parts for printing.  I printed using PETG and a 0.2mm layer height.  The first 2 photos are on a P1S and the last three are on an H2S.