A1 nozzle adapter for SV08
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I saw someone ask about this so i took a shot at it. I couldn't test it out, so if someone tries, please comment.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 291
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
This should adapt a removable A1 nozzle into a SV08 toolhead. It involves making a semi permanent modification, as you have to cut off the oval that the original nozzle screws to, and sink the 2.5mm heatset deeper into the backplate, then drill and set 3 mm threaded heatsets into the backplate. I don't have a working toolhead so i couldn't test it out, I just put filament through it as a test. If someone makes the please comment. I included a template to drill the 3 holes for the heater. Also you need 2 more 3mm heatsets for the attachment screws, and 2 2mm heatsets for the fan.