Art Deco Jewelry Box: The Lovers' Edition
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Art Deco "Lovers" Box: Featuring gear hinges, spring latches, and an elegant heart motif. Support-free and snap-fit.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 56
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
This jewelry box blends the geometric elegance of the Art Deco movement with a romantic centerpiece: a heart framed by intertwined hands. Beyond its aesthetics, the box is an engineering showcase, featuring synchronized gear hinges and a triple-spring latching system that provides a satisfying tactile click when closed.
Design Features
Intertwined Hearts & Hands: A high-detail lid design symbolizing connection and love.
Gear-Driven Hinges: A unique mechanical hinge system where the gears mesh during opening.
Spring-Loaded Closure: Three internal flexible latches ensure the lid stays securely shut.
Tool-Free Assembly: All components are designed to snap-fit together.
Printing Recommendations
Nozzle: 0.4mm
Layer Height: 0.18mm (Optimized for mechanical tolerances).
Infill: 10%.
Supports: None required when printed in the default orientations.
Stability Tips: * I recommend a 6mm+ brim for the lid and maybe a small brim for the pins/latches.
Lid Orientation: To maximize the detail of the hands and heart, the lid must be printed on-edge (oriented upside down).
Bed-Slinger Note: Orient the lid along the Y-axis to prevent wobbling as it reaches its maximum height. A version with built-in braces and tabs is included for extra stability.
Assembly Instructions
1. The Gear Hinges (Build 2) Each hinge consists of four parts (A, B, and 2x C). Intermesh the gears of Parts A and B, then slide Parts C through the center until it snaps into place. You will need two completed hinges.

2. Lid & Latches Insert the three latch springs into the designated holes in the lid. Ensure they are pushed in completely until you hear a click; if they aren't fully seated, the box may not latch correctly.

3. Final Marriage
Insert the top of the hinges into the lid slots first. They should click into place.
Align the bottom of the hinges with the slots on the box body and slide them in until they lock.
Note: If the hinge's fit is too tight, lightly trim the small alignment ridges on the hinge tabs.

