Wheel Hub and Tires for RC Car/Robot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wheel Hubs and Tires (2 designs for each) - to fit dual shaft DC mini motors - used in RC cars and robots
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 131
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- GNU General Public License v3.0
I made these wheels and hubs to fit the Dual shaft geared DC moors that re commonly used in smart cars and robots.
The ones wheels that are often included with the DC motors are slippery and the floor contacting surface is curved. Rubber wheels supplied separately are quite expensive and hard to find. So I decided to design a couple of my own to include with my robot QB.
The tires should be printed in TPU, 2-5% infill 3 outer layers, be sure to orient them in opposite direction on the build plate - and make one right and the other left.
The wheels are printed face down, out of PLA, or your favorite rigid material. 5-10 % infill.
The tyres and wheels are interchangeable and neither part requires support.