HILOOK Bullet Camera Junction Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
HILOOK Bullet Camera Junction Box
This model is a custom junction box / mounting base designed for HILOOK bullet cameras (tested with IPC-B141H-C).
It allows a clean and professional installation by hiding all connectors and excess cable inside the box while preserving the original camera mounting system.
The box fits between the camera base and the wall or ceiling and provides enough internal space for Ethernet cable, PoE connector, or 12V power cable.
Features
Designed specifically for HILOOK bullet cameras
Space for cable management and connectors
Uses the original camera mounting screws
Keeps the original camera angle adjustment
Clean look after installation
Suitable for wall or ceiling mounting
Two-part design: base box + camera adapter plate
Compatible camera
HILOOK IPC-B141H-C
(very likely compatible with similar HILOOK bullet models using the same mounting base)
Assembly
Fix the junction box to the wall or ceiling using screws.
Route the Ethernet / power cable into the box.
Attach the camera using its original mounting screws.
Adjust the camera direction as usual.
Disclaimer
This model is not an official HILOOK accessory.
Use at your own risk and verify dimensions before permanent installation.