16x16 LED Matrix Diffuser Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed an original LED Matrix project to add better support and ventilation
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 190
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This enclosure is a remix of an existing 3D print design, based on this original project:
The original design focuses on a clean, polished enclosure for an addressable LED matrix project driven by an ESP32. My contribution does not change the core concept or electronics. The changes were intentionally minimal and the modified pieces are compatible with the original design.
Comments and tips
The added ventilation does not interfere with structural rigidity
I improvised when it came to the screws used:
M2.5 × 6 mm screws
Threaded inserts for repeated assembly/disassembly without damaging the plastic
A strong recommendation is to print this enclosure in black filament. Dark filament significantly improves perceived contrast. This effect, along with recommendations for diffuers, are explained in more detail here:
Print Settings & Notes
Dimensions (L × W × H): 92.9 × 172.5 × 172.5 mm
Printer used: Prusa MK3S
Print Time: ~30h
Infill: 15%
Infill pattern: Gyroid
Material: Sunlu PLA Plus 2.0
Supports: Not required (depending on slicer and orientation)
Assembly: M2.5 × 6 screws with threaded inserts