1 / 2
Z-Drive Motor Tensioner Mod 350 Meshed Skirt Remix — zdjęcie 1
1 / 2

Z-Drive Motor Tensioner Mod 350 Meshed Skirt Remix

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix to add meshed skirt to Z-Drive Motor Tensioner mod (350mm), skirts pulled from thunderkeys 2.4r2 skirt mesh mod.

Ocena
0 / 5
Polubienia
4
Pobrania
12
Wydruki
0
Wyświetlenia
69
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

Been working on mesh skirts for my Voron 2.4, but nothing was there for the Z-Drive Motor Tension Mod skirts.  I found the meshed skirts from 'thunderkeys' and pulled the hex/mesh from those and put them into the Z-Drive mod skirts.  Will need to print 4, but two will need to be mirrored on the x-axis (as seen in the photos) using your slicer of choice.

I use the center mount power/ethernet connector, so my case uses 4 of these skits.  Your particular set up may require something different for size skirts in the rear.