Under-Shelf Pipe Mount (23 mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a compact under-shelf pipe mounting bracket designed to securely hold a 23 mm diameter pipe or rail beneath a fl
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 33
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- GNU General Public License v3.0
Under-Shelf Pipe Mount (23 mm)
This is a compact under-shelf pipe mounting bracket designed to securely hold a 23 mm diameter pipe or rail beneath a flat surface such as a desk, shelf, or cabinet.
The mount fixes to the underside of the surface using four screws and supports the pipe from below with a close-fitting circular cradle. It is suitable for applications such as wardrobe rails, cable conduits, lightweight support bars, or custom furniture projects.
Dimensions
Pipe inner diameter: 23 mm
Total height (base to top): 50 mm
Mounting screw holes: 3 mm diameter (designed for standard wood screws)
Printing Notes
Recommended orientation: print flat on the base
Supports required
20–30 % infill is sufficient for most non-load-bearing uses
PLA is adequate for indoor use; PETG recommended for higher temperatures or mild flex
Assembly
Fix to the underside of the surface using four 3 mm screws
Slide the pipe into the cradle once mounted
This design prioritises simplicity, clean lines, and ease of printing while maintaining adequate strength for light to moderate loads.