1 / 3
Propeller for Grizzly Battery Leaf Vacuum - ALS 4025 — zdjęcie 1
1 / 3

Propeller for Grizzly Battery Leaf Vacuum - ALS 4025

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Propeller for Grizzly Battery Leaf Vacuum - ALS 4025

Ocena
0 / 5
Polubienia
4
Pobrania
31
Wydruki
0
Wyświetlenia
116
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

Replacement propeller for the Grizzly Battery Leaf Vacuum - ALS 4025. Printed on a Prusa MKS3+ using Prusament PETG Carbon Fiber material. To increase durability, I increased the number of perimeters to 4 and the infill to 30%. Supports are necessary because the bottom is not flat due to the pocket for the nut. However, it was very easy to remove them, so the bottom looks perfect – see photo.

So far, it works perfectly, but it has only been used for a short time. Perhaps another material, such as nylon, would be more suitable. Time will tell how long it lasts.

Tagi