1 / 1
Wide funnel grommet for chipboard with 18mm thickness
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Slightly revised Brace9 filament grommet to be shorter so it can be used for chipboards with 18mm thickness
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 37
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I printed with Signal White PETG from Prusament. Slightly revised Brace9's remake of czargb's filament grommet to be shorter so it can be mounted on a 18mm chipboard
Drill hole is unchanged at ¾" or 18mm.