Pluggable coat and cable holder for industrial tables
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pluggable coat and cable holder for industrial tables with 8mm (square or round) holes and 30mm grid.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 23
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Inspiration
At work we have Manuflex® industrial tables for lab usage.
I missed a part to deal up with cables lying or hanging around there.
So I played around with OpenSCAD to design something useful for that that purpose.
These tables have extensions with 8mm holes in a 30mm grid. The holes are round on one side of stand and square on the other. SO I made a design for both variants.
Description
This model includes the files for the coat hook for the round hole variant and the cable hook (2 hooks and some guide nodes) for round and square hole variants.
The hooks fit to 8mm holes in a 30mm grid (Manuflex® tables or similar parts).
The included OpenSCAD file is prepared to be used with the integrated customizer to select the variants the model offers.
Printing
I used and recommend using PETG for the hooks.
For printing You need to activate supports and I recommend using a brim, too.
For slicing I turned the parts by 90 degrees.
With my first printouts I noticed some rip off due to warp effects. So I used a brim of 6mm and added an additional mini disc whose brim intersects with the stand of one (critical) support to add some more adhesive area and prevent this rip off.
Using
To mount the hooks move them horizontally into the top holes and turn 'em down until they snap in.
Enjoy.