Original Filament Pelletizer PEL1.1 by ARTME 3D
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This pelletizer is used to make high quality pellets out of plastic filaments.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 275
- Wydruki
- 2
- Wyświetlenia
- 800
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Original Filament Pelletizer PEL1.1 is a commercially certified complete kit from ARTME 3D®. The kit comes with all the necessary components; only the 3D-printed parts need to be printed by the user. You can buy the necessary metal parts here. The documentation is availible here: www.artme-3d.de/produkte
Difference betreen version PEL1 and PEL1.1:
Revision of some components to prevent wear or softening of the pressure parts due to prolonged operation. If you want to upgrade from version PEL1 to version PEL1.1:
1. Print parts PEL-A, PEL-C, and PEL-T from version PEL1.1.
2. Purchase 2x shims 10x30x01.25 (10 mm inner diameter, 30 mm outer diameter, and 1.25 mm thickness).
3. Purchase 1x shim 22x30x0.5 (22mm inner diameter, 30mm outer diameter and 0.5mm thickness)
4. Follow the instructions.
Here are the technical data and features of the Pelletizer PEL1.1 by ARTME 3D:
Pelletizer for producing pellets from filament.
Driven by a drill, drill press, or cordless screwdriver. (Requires a drill with speed control and a drill chuck with a 10 mm opening. Cordless screwdrivers are only for short-term use.)
The filament is actively fed.
Filament diameters from 1 to 3 mm can be processed.
Pellet length adjustable to 4.5 mm for high-speed pelletizing or 2.5 mm for micro pelletizing (by changing the gear mechanism).
Pelletizing capacity at 1500 rpm approx. 2-5 kg/h depending on pellet length and diameter.
The blade elements are made of laser-cut stainless steel and are designed to generate very little heat. This allows 5 to 15 kg of filament to be pelletized in one pass before cooling is required. Depending on filament diameter and pellet length.
The flywheel function ensures high impact force with low input power. This allows for relatively long operation even with less powerful cordless screwdrivers.
Suitable for mounting on a desk, on a drillpress or on a bucket with a lid for direct collection of the pellets.
Certified and safe design. No dangerous parts can be touched.
Any filament residue remaining in the device between the feed drive and the knife blade can be easily removed via a service opening.
Work required for installation:
Depending on experience, assembly of the pelletizer can take between 0,5 and 2 hours.
Additional accessories equired:
The 3D-printed components must be printed by the user. The printer's print bed must be at least 180x180mm in size.
Additional tools required:
Hammer or vice
Phillips screwdriver
1,5mm, 3mm and 4 mm hexagon socket wrench
Cleaning alcohol and paper towels
Spool holder
Print Settings:
Print with 0,4mm nozzle and 0,2mm Layer hight.
Print all parts with 6 Wall, Top and Bottom lines
Print alle Parts with 30% Infill
You need to use support-structure for this parts: PEL-D1, PEL-D2, PEL-E, PEL-I, PEL-H2, PEL-G und PEL-R. Remove the support structure very carefully and completely.
Print Material:
Part PEL-A, PEL-B and PEL-C should be printed in PETG or ABS. The rest can be printed in PLA.
Part-Options:
The parts with the word (Option) in the file name are explained as follows:
Use part PEL-D1 if you want a pellet length of 4 to 4.5 mm. If you want a pellet length of 2 to 2.5 mm, use the PEL-D2 part instead.
If you want to attach the pelletizer to a table or a drill press, use the parts PEL-R and PEL-S. If you want to mount the pelletizer on a bucket with a lid, use the part PEL-Q instead.