1 / 8
TPU-Stoppers for Filament Spool Holder Axis of Prusa Enclosure V2 - MMU2S — zdjęcie 1
1 / 8

TPU-Stoppers for Filament Spool Holder Axis of Prusa Enclosure V2 - MMU2S

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

TPU stoppers that fit on the 8mm aluminium tubes of the spool holder. They keep the tube in place when changing spools.

Ocena
0 / 5
Polubienia
0
Pobrania
3
Wydruki
0
Wyświetlenia
55
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial

Motivation

After years of happily working with the Lack Enclusure

and juggling with the aluminium tubes falling out of the spool holder when changing spools, I finally took some time to design TPU stoppers for the 8mm aluminium tube used as axis.
The stoppers are simply pushed onto the open ends of the axis and fit neatly into the spacing of the spool holder core.
They properly hold the tubes in place when changing spools.

Hurra, it works ... I should have done this much earlier

Print

Material:        Sunlu TPU 95A (white)
Layer height:  0.2 mm
Supports:       no
Brim:               no
Sheet:             smooth or satin metal sheet

Sequential printing minimizes stringing and results in better part quality.

Assembly

[1] Place the aluminium tube axis in the spool holder core
[2] Push a spool holder onto each open end of the axis and fit them neatly into the spacings (left & right) of the spool holder core.
[3] Center the spool holder core onto the axis so it can spin freely when places on the spool holder fixations.

Tagi