7mm Hex, Rear Axle, & Wheels (OpenRC F1)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rear Axle, Rear Wheels, and Wheel Nuts with a Hex Design for more power capability.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 122
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
Replaces the original rear axle & wheels which are prone to rounding out under loads higher than a brushed motor. This design includes the axle, F104 Rear Wheels, and the Rear Wheel Nuts. Everything should print fine with standard settings.
I recommend printing using PETG or another strong material if you're printing this out. PLA Plus might get you by if you're running lower powered motors (Traxxas Titan 2T or comparable).
I managed to get the car up to it's top speed of about 50 mph or so with a PETG Axle. I ran a Traxxas BL-2S motor and a 2S battery. Just beware of outside temps since 3D prints are brittle at or near freezing temps.
The wheel, axle, and nuts should go on the car just like the original parts. No special assembly instructions needed.
(Yes I see the VFA's on my pictures. I'm working on my print settings to make my parts look better.)
UPDATE 02/03/2026: I have added a 3MF file with all the parts already arranged if you're a fan of that. Happy printing!
Designed with Autodesk Inventor (Student License)
Modified from the original CAD files by Daniel Noree